First Steps towards RaspberryPylot

I’m working on using the Raspberry Pi as a remote control replacement. The “chain of command” goes as follows:

USB-Gamepad > Laptop >TP-WN722NC
~~~802.11n~~~
TP-WN722NC > Raspberry Pi > I2C > PCA9685 > Servos & Motor Controller

So far so good, everything seems to be working with acceptable low latency. I’ll just need to code some security measures, if the signal is lost (motor off and servos positioned for a slight turn).

As the last weeks were rather busy and I was stuck with a bad cough, I’m still not completely finished with the Easy Star II. As the Raspberry Pi won’t fit completely into the fuselage, I’ll have to adapt the canopy for it:

I made some of the code used available on github.