Reading & writing data from/to a SD Card using a Teensy 3.1 and SD/MM card breakout board:
Don’t forget the 10kOhm pull-up resistors on the digital pins (not GND and VCC). 😉
Just a little tinkering around …
vague but exciting …
vague but exciting …
Reading & writing data from/to a SD Card using a Teensy 3.1 and SD/MM card breakout board:
Don’t forget the 10kOhm pull-up resistors on the digital pins (not GND and VCC). 😉
Just a little tinkering around …
hi, do you have any tutorial or blog somewhere realting to sd card and teensy 3.1?
No, sorry. You’ll have to look around, I’m pretty certain you’ll find something.